On this page
Types of denture and how they stay in place
A partial prosthesis complements still existing teeth. Depending on the findings, these teeth can support or hold the dentures. A full denture replaces the teeth of a toothless upper or lower jaw. In everyday life, both are often referred to simply as prosthesis. For advice, the distinction is important, because support, care and acclimatization differ. In the case of a jaw with no remaining teeth, a restoration can be additionally supported or anchored on implants. What possibilities are there, is only the examination and the desired handling. [1] [2] Our treatments include Prosthetics at smileDentity.
How does a denture hold?
It depends on its design. A partial prosthesis can support itself on existing teeth. Combined solutions with double crowns or anchorages on implants are also possible depending on the findings. In a full prosthesis without implants, the shape of the prosthetic bearing plays an essential role. [1] [2]
How a removable prosthesis gets hold
Partial prostheses can be guided, for example, via clasps, double crowns or other holding elements. Some supplies are based partly on mucous membranes and jaws, others also include teeth or implants. In a full prosthesis without implants, the shape and condition of the prosthetic bearing are particularly important. The design influences how well the dentures can be used, removed and cleaned. During the planning process, let us explain which parts remain in the mouth and in which places the prosthesis rests. This helps to compare different proposals for the same gap. [1] [2]
How a denture is chosen and fitted
A new prosthesis changes how tongue, cheeks and lips move while speaking and chewing. Some people need time to be familiar with their handling. If it pushes, hurts or can be used badly, it makes sense to control it. The practice can assess whether a pressure point, the shape of the prosthesis or the contacts during chewing should be adjusted. Please don’t try to grind off disturbing places yourself. Changes can worsen the fit or make it more difficult to adjust later. [1] [2]
What influences the selection?
In addition to the number and location of missing teeth, remaining tooth structure, tissue, bite, handling and cleaning are important. Before deciding, let us show you which parts are taken out and what daily care should look like. [1] [2]
When a comparison with bridge or implants is worthwhile
If there is a smaller gap, a fixed bridge may be considered. In case of several missing teeth or a jaw with no remaining teeth, removable dentures can help. Implants can help to maintain a restoration if necessary. They require surgery and appropriate follow-up care. Compare the variants based on the treatment steps, the expected hold, cleaning and handling. The choice should not only be made according to which construction is best known or first mentioned in the conversation. [1] [3] [2]
What information helps with planning
At the consultation, tell us what works well about a prosthesis to date and what should change. These can be pressure points, difficulty eating or problems taking out. Ask the dental team to explain which intermediate steps are planned and when the fit is controlled. For several options, it is helpful to discuss the care effort, the necessary pre-treatments and possible subsequent adjustments separately. Thus, the recommendation can be applied to the specific situation and not only to the number of missing teeth. [1] [2]
Getting used to a denture and caring for it
The prosthesis and the teeth, holding elements and mucous membrane remaining in the mouth need appropriate care. Even with a jaw with no remaining teeth, it can help to have the condition of the mucous membrane checked. For the prosthesis, use the cleaning method that matches its material and construction. Ask to be shown how to reach hidden areas. If the denture has less hold over time, it should be checked whether it can be adjusted. The mere concealment of a pressure site does not solve the cause. [1] [2]
What to do if a new prosthesis presses?
Seat and pressure points should be checked. Do not make any material changes yourself: During the check, it can be clarified whether the fit, the load or the tissue explains the symptoms. [2]
How we assess and treat at smileDentity
Andreas Haas, M.Sc., and the practice team can show at the consultation which restoration fits the existing abutment teeth. Anyone who already wears a prosthesis should bring it to the appointment. An existing treatment and cost plan can also help in comparing different cares. [1] [2]
Prosthetics at smileDentity is a point of contact for redesign and problems with existing dentures. When a prosthesis tilts while speaking, when eating causes pressure or suddenly sits differently, the description of the concrete situation is helpful. This allows a targeted assessment of the seat and support. [1] [2]
At smileDentity we also check the seat of the prosthesis in the movement that makes you difficult. When it tilts while cutting, we look specifically at the support and the contacts at the jaw closure.
Treatments and information at smileDentity
Related treatments
Related entries in the smileDentity glossary
Frequently asked questions
A bridge is usually a fixed gap replacement. A removable prosthesis pursues a different design and care concept.
No. A full prosthesis can also be made without implants. Depending on the findings, implants can be considered as additional anchorages. For this, the conditions for the procedure and the care must be taken into account.
Arrange a check and show where the prosthesis presses. The practice can check whether the fit or bite should be adjusted. Do not grind the prosthesis yourself.
That depends on the care and healing situation. Especially after immediate care the individual instructions of the dental practice apply.
Sources
Questions about your findings?
At an appointment, we can discuss the findings, possible next steps and alternatives.
Author: Andreas Haas, M.Sc.
Medical review: This English article was reviewed and approved by Andreas Haas, M.Sc. on 7 November 2026.